Ener-Spray - Leaders in Residential Half-Pound Insulation - All Western Canada

½ Pound Foam Insulation

residential

Half-pound Insulation image

½ lb. light density spray foam provides insulation, sound-proofing and airseal. It is designed mainly for filling cavities and interiors.

Applications: Interior/Exterior stud cavities. Soundproofing between floors and walls. General cavity fill. Complete air seal.

Features: Non-toxic material. A green material. No off-gassing. Seamless. Consistent R-factor.

Contact:
Alberta, Sask and NWT
Expands to 120 times its liquid volume

½ lb. foam is spray-applied as a liquid and expands within seconds to 120 times its liquid volume. The foam adheres directly to the substrate forming a seamless and permanent coverage over and around even the most difficult shapes. This seal provides superior energy efficiency and improved indoor air quality by eliminating air movement through walls. Once in place, ½ lb. foam maintains its performance for the life of the building. Unlike many conventional insulations, time and temperature changes have no effect on the R-value of spray foam insulation. ½ lb. foam is non-toxic and has undergone extensive testing, meeting all building code requirements.

A green product with no CFCs, ozone depleting chemicals and no dust

1/2 lb foam is a green product developed with the environment in mind. Its unique formula contains no ozone-depleting chemicals, such as CFCs, HCFCs, fibres, formaldehyde and asbestos. No toxins are emitted during preparation and installation, and since it never decomposes or deteriorates there are no concerns about harmful fibres or gases escaping into the air in the future. ½ lb. foam reduces airborne noise and dust making it the healthy choice for those who suffer from allergies, asthma or chemical sensitivity.

Cold Floors over Garages and Places Where the House Hangs Past the Foundation

Many houses have rooms built out over the garage or floor spaces that cantilever past the foundation. These rooms tend to be very cold in the winter due to poor insulation, improper air-barrier and vapour seal. As a result of these problems these floor spaces can also be susceptible to moisture and mold. It is common practice for Ener-Spray to remove the old inefficient insulation in these spaces, dispose of it and replace it with ultra efficient Ener-Spray foam insulation. This provides a complete air seal, a higher R-value and a continuous vapour barrier. The Ener-Spray system has been proven for over 15 years to perform in these areas and has become the industry standard for quality home builders.

Cold Flat Roof Systems or Low Pitched Roofs on Older Homes

Many older homes built in the 1960’s to 1980’s have low sloped vault or flat roof systems with insufficient insulation which results in significant heat loss, high energy bills and a cold uncomfortable environment. In these situations Ener-Spray can replace your old insulation with high efficient spray foam bringing your R-value up to modern code eliminating moisture problems and heat loss. This application is best to be done when a home owner is replacing the shingles on their roof and we can spray down onto drywall or wood tongue in groove creating a perfect seal and a new uncompromised vapour barrier. This system is proven and has received rave reviews from our customers.

Top quality material that meet and exceed all building code reqiurements

Ener-Spray only uses top quality material that meet and exceed all building code reqiurements. Our trusted manufacturers are BASF, Demilec, PFSI and Elastochem.

Applications

Interior/Exterior stud cavities. Soundproofing between floors and walls. General cavity fill. Complete air seal.

Key features

Non-toxic material
½ lb. foam is non-toxic and has undergone extensive testing, meeting all building code requirements.
A green material
Contains no ozone-depleting chemicals, such as CFCs, HCFCs, fibres, formaldehyde and asbestos.
No off-gassing
Never decomposes or deteriorates -- within studs, interiors and away from sunglight -- so no harmful fibres or gases escape in the long-running future
Seamless
Adheres directly to the substrate forming a seamless and permanent coverage over and around even the most difficult shapes.
Consistent R-factor
Time and temperature changes have no effect on the R-value of ½ lb. foam insulation.
Availability
Ener-Spray can provide ½ Pound Foam Insulation services for Western Canada, including:
check_box
Calgary
check_box
Edmonton
check_box
Northern Alt
check_box
Greater Vancouver
check_box
Vancouver Island
check_box
Northern BC

Ener-Spray Systems Inc. is the residential division of our Group of Companies and is committed to providing the highest levels of quality and service of spray foam insulation in Calgary and surrounding area. As pioneers in the spray foam industry, Ener-Spray has a high level of experience and sets the standard for customer service. Because of our extensive background in the construction industry Ener-Spray has the qualifications and experience to recommend which product works best for different applications and budgets. Spray foam insulation pays for itself and generates savings in energy costs for the life time of your home, saving you up to 50% on your energy bills. Ener-Spray has achieved the "Foam Master” certification through BASF.